钢板资讯

Steel Plate钢板资讯

佛山白色家电彩钢板_pcm预涂家电彩板_滚筒洗衣机侧板电器外壳0.8*1000*C ...

2021-12-6 09:55| 发布者: steelfu4mo| 查看: 906| 评论: 0 |原作者: 佛山万庆物资

家电生产过程的节能减排近年来也得到了高度重视,许多地方政府已经限制新上喷涂生产线,并要求对排放不达标的旧喷涂线进行环保改造,这将促使家电企业直接采用彩涂板,放弃原来的镀锌或者冷轧板磷化喷涂工艺,部分工作环境较好的室内家电外壳材料正在考虑用较低膜厚的彩色耐指纹钢板代替喷粉镀锌钢板或彩涂板。

Home appliance production process of energy conservation and emission reduction has also attached great importance in recent years, many local governments have restricted the new spraying production line, and requires the emission of substandard old spraying line environmental protection transformation, this will promote home appliance enterprises directly use color coating, give up the original galvanized or cold rolled board phosphorus coating process, part of the working environment of indoor home appliance shell materials is considering with lower film thick color fingerprint plate instead of powder galvanized steel plate or color coating.

传统的家电涂装主要是喷粉、贴膜两种,家电侧板主要是喷粉,而面板主要以喷粉和贴膜为主。喷粉属“后涂装”工艺,家电外壳在加工成型后喷粉涂装,其涂膜厚、成本高、效率低、花色品种单一,而且占用空间大,所以无法满足日新月异的家电市场要求。

Traditional home appliance painting is mainly powder, film two kinds, home appliance side board is mainly powder, and the panel is mainly powder and film.Powder spraying belongs to the "post-painting" process, the home appliance shell is coated after processing and molding, its thick coating film, high cost, low efficiency, single color variety, and occupy a large space, so it cannot meet the ever-changing requirements of the home appliance market.

家电预涂彩板是将涂装好的金属板材裁剪成要求的规格,直接加工组装成型,简化了生产工艺,提高了生产效率,节省了投资和运转费用。因为预涂彩板在加工过程中试将成卷的金属板材涂上涂料,经过烘烤固化成膜,这种涂装方式生产效率高,烘烤过程中产生的有机溶剂废弃可以收集焚烧,有利于节能环保,所以近几年预涂家电彩板的发展相当迅猛。

Home appliance pre-painted color plate is to cut the painted metal plate into the required specifications, direct processing, assembly and molding, simplify the production process, improve the production efficiency, save investment and operation costs.Because the pre-painted metal plate will be coated in the processing process, baked and solidified into a film, this coating method has high production efficiency, the organic solvents produced in the baking process can be collected and incineration, conducive to energy saving and environmental protection, so the development of pre-painted home appliance color plate is quite rapidly in recent years.

彩涂镀锌板

如没特殊注明,文章均为某某科技原创,转载请注明  
返回顶部