钢板问题

Steel Plate钢板问题

【机房彩钢板】为什么彩钢板能成为机房墙面的建筑材料?

2021-11-13 09:45| 发布者: steelfu4mo| 查看: 296| 评论: 0 |原作者: 佛山万庆物资

为什么彩钢板能成为机房墙面的建筑材料?主要有以下七个原因:

一、因为彩钢板符合国标一级防火标准,能充分满足机房建设装修的防火要求。

二、因为彩钢板由0.6mm热镀锌钢板,12mm防火石膏内饰板所组成。机房彩钢板面漆为硬化多元聚酯涂料,此涂料本身含有导电成分,通过增加导电系数,降低静电负荷,表面抵抗值1058Ώ电荷减弱1秒以下;采用静电烤漆喷涂工艺,表面平滑、细腻,不积尘,保养简单,极大的保证了机房的洁净度要求。

三、因为机房彩钢板表面为烤漆钢板,防潮、防霉,耐酸碱、防静电,隔音率500Hz可达45dB(一般500Hz所产生的噪音为118dB),其计权隔声改善量相当高。

四、彩钢板安装工期短,现场干净,为整个工程节约宝贵的施工时间。机房彩钢板均可拆卸再复原,可方便进行组装拆卸,对维护水电,线路改造等非常便捷。

五、能够在机房彩钢板的墙面任意穿孔,对安装控制开关、电源插座等装置非常方便,无需另外处理。表面颜色柔和,与地板、天花构成统一和谐的整体,使整个空间具有现代气息

六、彩钢板孔隙率高,均为微细的毛细孔,导热系数小[一般为0.121~0.205w/(m.k)],热容量大、吸湿性强,故能对室内温度起到一定的调节作用。

七、彩钢板隔间系统符合CNS12514-5Kg落锤冲击试验规定,抗冲击能力强。

佛山市万庆物资有限公司售有机房墙面专用彩涂钢板,详情可致电13380241768(陈生)咨询~

Why can the color steel plate become the building material of the machine room wall?There are seven main reasons:

First, because the color steel plate conforms to the national standard level fire prevention standards, can fully meet the requirements of machine room construction decoration.

Two, because the color steel plate is composed of 0.6mm hot galvanized steel plate, 12mm fire-proof gypsum interior board.The color steel plate paint of the machine room is hardened multiple polyester paint, which itself contains conductive components. By increasing the conductivity, reducing the electrostatic load, the surface resistance value of 105-8 Ω charge is reduced by less than 1 second; using the electrostatic paint spraying process, the surface is smooth, delicate, no dust accumulation, simple maintenance, greatly ensuring the cleanliness requirements of the machine room.

3. Because the surface of the color steel plate of the machine room is paint steel plate, moisture-proof, mildew resistance, acid-alkali resistance and static resistance, the sound insulation rate of 500Hz can reach 45dB (the noise generated by generally 500Hz is 118dB), the amount of sound insulation is quite high.

IV. The installation period of color steel plate is short and the site is clean, saving precious construction time for the whole project.The color steel plate of the machine room can be dismantled and restored, which can be convenient to assemble and dismantle. It is very convenient for hydropower maintenance, line transformation and so on.

5. It can be arbitrarily perforated on the wall of the color steel plate in the machine room, which is very convenient to install control switches, power sockets and other devices, without additional treatment.Surface color is soft, constitute unified and harmonious whole with floor, smallpox, make whole space has modern breath

6. High porosity, which are fine pores, small thermal conductivity [generally 0.121~0.205w/(m.k)], large thermal capacity and strong hygroabsorption, so it can play a certain role in regulating the indoor temperature.

VII. The color steel plate compartment system meets the provisions of CNS12514-5Kg drop hammer impact test and has strong impact resistance.

Foshan Wanqing Materials Co., Ltd. sells a special color-coated steel plate on the wall of the machine room, the details can call 13380241768 (Chen Sheng) for consultation ~

如没特殊注明,文章均为某某科技原创,转载请注明  
返回顶部