2022-4-15 10:35| 发布者: steelfu4mo| 查看: 1200| 评论: 0 |原作者: 佛山万庆物资
彩钢板涂层一般根据用途分为两大类:即建筑用和家电用。建筑用涂层根据使用环境的不同,在环氧树脂、聚酯树脂、聚氯乙烯塑料溶胶、硅改性聚酯和聚偏氟乙烯中选择。家电用涂层一般采用聚酯树脂。彩钢板的涂层包括底漆、面漆和背面漆。
Color steel plate coating is generally divided into two categories according to its use: namely for construction and home appliances.Coatings for construction are selected in epoxy resin, polyester resin, PVC plastic sol, silicon vinyl chloride modified polyester and polyvinylidene fluoride according to the environment used.The coating used for home appliances generally uses polyester resin.The coating of color steel plate includes primer, toppaint and back paint.
家电涂料通常都是由饱和聚酯树脂、聚酯树脂、环氧树脂等基料混合制成,一般都具有平滑通透的表面效果,较好抵御高湿度环境性能,优异的物理机械性能,优良的耐热性、耐化学药品性。家电涂料主要应用于空调、冰箱、微波炉和机电设备等行业的表面涂装。很多时候,家电涂料对各类家电外壳上起保护和装饰作用。而且因为家电产品的多样性,也要求颜色丰富多彩多、品种多种多样。
Home appliance coatings are usually made of saturated polyester resin, polyester resin, epoxy resin and other base materials mixed, generally have a smooth and transparent surface effect, better to resist high humidity environmental performance, excellent physical and mechanical properties, excellent heat resistance, chemical resistance.Home appliance coating is mainly used in air conditioning, refrigerator, microwave oven and mechanical and electrical equipment industry surface coating.Most of the time, home appliance coating protects and decorates all kinds of home appliance on the shell.And because of the diversity of home appliance products, also require rich and colorful colors, variety.
就pcm彩涂板而言,pcm彩涂板生产机组必须在无尘的环境中生产,车间环境、烘烤炉内,任何接触带钢的设备、辊道、进厂房的空气、涂料等必须绝对干净。
In terms of pcm color coating board, pcm color coating board production unit must be produced in a dust-free environment, workshop environment, baking furnace, any equipment contacting strip steel, roller path, air and paint into the workshop must be absolutely clean.
在彩涂生产过程中对于清洗段的清洗效果、涂漆室生产环境、涂料细度、所使用的冷却空气清洁程度、水冷设备的冷却水杂质含量都要进行严格控制。
In the production process of color coating, the cleaning effect of the cleaning section, the production environment of the paint room, the coating fineness, the cleaning degree of the cooling air used, and the cooling water impurity content of the water cooling equipment should be strictly controlled.