钢板资讯

Steel Plate钢板资讯

深圳华美家电彩涂卷材质面板材质pcm彩涂板白色彩钢卷酒红色彩钢板 ...

2022-4-26 10:36| 发布者: steelfu4mo| 查看: 1068| 评论: 0 |原作者: 佛山万庆物资

我国pcm彩涂板近年以来新增产能主要以高端建筑、家电板材发展定位为主。在建筑方面,关注高建筑彩涂产品研发应用,如绒面、网纹彩涂、冷屋面彩涂、铝镁锰系列彩涂等高装饰产品。

In recent years, China's pcm color coating plate new production capacity is mainly high-end buildings, home appliances plate development positioning.In the aspect of architecture, pay attention to the research and development and application of high-end architectural color coating products, such as suede, mesh color coating, cold roof color coating, aluminum magnesium manganese series color coating and other high-end decorative products.

pcm彩涂板良好的外观和优异的性能唤醒了建筑设计师和屋主显现屋顶的兴趣,屋顶再也不是仅仅满足遮风挡雨的功能而需要具有设计特征。用彩涂板制作的屋顶系统可以增添其他建筑元素的色彩,可以获得屋顶板板辐和接缝大范围变化所带来的效果。彩涂板建筑屋顶坡度较陡,典型值为312甚至更高,以利于快速排泄雨水。坡度小的屋顶不易看见,通常选用镀铝锌光板,对于坡度小于1/412屋顶,采用镀铝锌光板更加经济,事实证明经过20年使用后仍保持优异的性能。屋顶板通常不直接安放在屋檩上而放置在骨架上,骨架可以是木制或钢制。在屋顶板和支架之间通常垫放30磅后的纸或类似材料。部分彩涂板屋顶设计成屋顶结构直接接触的形式。屋顶板通常为扁平形状,1024英尺宽。可以采用细小的纵向肋条提高强度和成型。使用穿透钢板紧固件或是隐蔽的夹件将钢板固定在骨架上。屋顶板叠放或纵向焊合在一起。焊接方式分为撑条(batten)式和咬合(snap-together)式,撑条式又可细分为传统的箱式、帽式和整体式。焊缝典型高度约3/42英寸。经咬合及传统箱式方法焊接的屋顶板采用隐蔽的夹件或固定在焊缝上的铁角紧固在骨架上,整体式焊接的屋顶板通过铁箍或隐蔽的紧固件固定在骨架上。活动的铁箍和铁角设计可以防止屋顶板热胀冷缩。

The good appearance and excellent performance of pcm color coating has awakened the interest of the architect and the roof, which is no longer only meeting the function and needs to have design characteristics.A roof system made of color-coated panels can add color to other architectural elements, obtaining the effect of a wide range of changes in the roof panels and joints.The roof of the painted building is steep with a typical value of 3:12 or higher to facilitate rapid discharge of rainwater.The roof with a small slope is not easy to see, the aluminous galvanized sheet is usually used, for the slope is less than 1 / 4:12 roof, the aluminous galvanized sheet is more economical, it has been proved that still maintaining excellent performance after 20 years of use.Roof panels are usually not placed directly on house purlins but on skeletons, which can be wooden or steel.Paper or similar material usually placed 30 pounds between the roof board and the bracket.Part of the color-coated board roof is designed in the form of direct contact with the roof structure.The roof panels are usually flat in shape and range from 10 to 24 feet wide.Small longitudinal ribs can be used to improve the strength and molding.Attach the steel plate to the skeleton using penetrating steel plate fasteners or concealed clamps.Roof panels are stacked or vertically welded together.The welding mode is divided into support bar (batten) type and occlusal (snap-together) type, which can be subdivided into the traditional box type, cap type and integral type.Typical weld height is about 3 / 4 to 2 inches.The roof plates welded by occlusion and traditional box type method are fastened to the skeleton by concealed clamps or iron angles fixed to the weld, and the integral welded roof plates are fixed to the skeleton by iron hoop or concealed fasteners.Active iron hoop and iron corner design can prevent the roof plate from hot expansion and cold shrinking.

建筑面板生产厂商能够大范围提供不同形状彩涂墙面板,宽大正面的所有区域的墙面板外观和所需的建筑效果能够完全一致。高质量的pcm彩涂板可以确保整个项目的钢板色彩和外观保持一致。同样,由于使用一样的材料可以最大限度减少连接和转接技术问题,所以,对整体设计效果有关键影响的部件(trimwork,stops,copings)等可以采用大面积外覆件同样的材料、色彩和处理。

Building panel manufacturers can provide a wide range of different shapes of a painted wall panel, the wide front of all areas of the wall panel appearance and the desired architectural effect can be completely consistent.High quality color coated plates ensure consistent plate color and appearance throughout the project.Similarly, because the use of the same material can minimize connection and transfer technology problems, the overall stops, copings (trimwork, s t o p s) can use the same material, color and treatment of large area covers.

如没特殊注明,文章均为某某科技原创,转载请注明  
返回顶部